Call us on:0086-510-82325189

Industrial Electrostatic Precipitator The Presence Of Industrial Electrostatic Precipitators Is Still Necessary

Source:

 Industrial Electrostatic Precipitator The presence of industrial electrostatic precipitators is still necessary. Because PM2.5 fine particles are increasingly serious, fog haze days increasing, more and more stringent flue gas emission standards and supervision. Industrial electrostatic precipitator is an efficient gas depth purification device, can be a good emission reduction PM2.5 fine particles, SO3 acid mist, gypsum rain, ammonia aerosol, heavy metals, purify the flue gas, reduce the chimney smoke, In the droplets, dust discharge standards, a desulfurization system to improve the depth of flue gas purification, PM2.5 fine particulate matter is very important, the state to promote the installation of efficient purification device.

  Industrial Electrostatic Precipitator Let's take a look at the installation requirements for industrial electrostatic precipitators.

  1, the main part of the dust collector to carry out the installation before the inspection and determine the acceptance in accordance with the "electrostatic precipitator installation instructions" and design drawings to install the components of the electrostatic precipitator, according to confirm the basis of acceptance of the electrostatic precipitator center installed Benchmark, and as a yin and yang system installation benchmark.

  2, check the flatness of the plane, column spacing and diagonal error

  3, check the shell parts, for the correction of transport deformation, from bottom to Industrial Electrostatic Precipitator top layer to install, such as the bearing group - the end of the beam (check the qualified after the installation of ash bucket, electric field inside the station) - column and side panels - Inlet and outlet (including distribution plate and slotted plate) - Cathode system - Top cover - High voltage power supply and other equipment. Ladder, platform, railings can be installed along the order of installation, each layer must be installed in accordance with the "electrostatic precipitator installation instructions" and design drawings to check and record requirements: such as flatness, diagonal, column spacing, vertical , Pole distance and other installation is completed, the equipment for air tightness inspection, for welding parts of the welding and welding, inspection, welding parts for welding.


Feedback
Your comments are always our motivation!
Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Copyright © China Machinery Engineering Wuxi Co.,Ltd