Call us on:0086-510-82325189

Inlet Concentration Of Dust

Source:

Entrance of dust concentration, which is determined by the technology of dust, in the design or when choosing a bag, it is second only to air capacity is an important factor. Expressed as g/m or g/Nm.

For the bag, and will directly affect the concentration of dust in the entrance to the following factors:

⑴ pressure loss and cleaning cycles. Inlet concentration dust faster on the same filter area, pressure loss increases, the result is to increase frequency of cleaning.

B bag and body wear. In cases with strong abrasive dust, wear can be considered proportional to the concentration of dust.

C taking of dust it is necessary. Taking of dust in front of the entrance to the dust collector is an additional level of dust removal equipment, also known as pre-dedusting.

D-ash-ash discharge capacity of the device. Ash plant ash discharge capacity should be able to discharge all of the dust-dust dust concentration multiplied by the volume is equal to the entrance.

⑸ mode of operation. Bag filters are divided into both positive and negative pressure operation, to reduce fan wear, the inlet concentration should not be using positive pressure mode of operation.

Feedback
Your comments are always our motivation!
Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Copyright © China Machinery Engineering Wuxi Co.,Ltd